Shoppingpc.net

Standard features of the X1000 X-Ray Inspection System include; A 2”x2” digital flat panel x-ray det

฿3995000.00
Inspection System include; A 2”x2” digital flat panel x-ray detector, 80 kV-7 micron x-ray tube
เหลือ 0 ชิ้น
ซื้อเลย
หยิบลงตะกร้า
  • หมวดหมู่ : X-RAY & Scaner
  • รหัสสินค้า : 000082

รายละเอียดสินค้า Standard features of the X1000 X-Ray Inspection System include; A 2”x2” digital flat panel x-ray det

         

Standard features of the X1000 X-Ray Inspection System include; A 2”x2” digital flat panel x-ray detector, 80 kV- 7 micron x-ray tube, Z axis movement of the x-ray tube and image detector, computer controlled kV and mA settings, computer controlled variable speed X-Y stage and full featured image processing CPU with 17 inch LCD flat panel monitor. The standard 1000 does not have a tilt or oblique viewing feature; there is an optional 360 degree rotation sample stage that

 

 

1-1. Safety Chamber

Dimensions - L*W*H : 43” *  29.5”  * 55”

Weight : Approx 1000 lbs

Power requirements : 50/60Hz,200VA,100 ~ 240VAC +/- 10%

X-ray leakage : less than 0.5mR/hour ( 100% protection safety chamber )

 

 

1-2. Sealed Type End window Micro Focus 80kV X-Ray Tube

Integrated 80kV Micro Focus X-Ray Source

Operating Voltage Range : 80 kV

Maximum Beam Current : .12 mA

Focal Spot Size : ≤8 ㎛

Tube Life Time : Approximately  5 Years

 

1-3. Flat Panel Digital Detector

High performance 12 bit

Resolution  1024 x 1024

Speed  1.2 fps

Video Displayed on 19” LCD monitor

Total system magnification 125X, Geometrical magnification 15X

 

1-4. Image Processor Capture X on the PC based Windows XP workstation

A software package designed specifically for real-time x-ray inspection systems

creates a high-performance PC-based image workstation with Windows XP

Noise reduction by frame averaging up to 256 most recent frames

CPU Speed : P4-1GHZ or higher

Memory : 256MB/133MHz SDRAM(min) or higher

Graphics card : 128MB AGP(min)

System : Windows XP®

 

 

1-5. 3 Axis Manipulator / Sample Stage

Special designed computer controlled manipulator

X,Y Axis stroke : 7.8” x 7.8”

Z Axis stroke: 8.6”

Sample Stage: 12.5” x 9.8”

 

 

 

1-7. Installation

WEwill provide installation and calibration service at the customers location

Installation includes assistance in registering your new x-ray system with local and state agencies where applicable.

One (1) on-site radiation survey at the time of installation  with supporting documentation

1-8. Training

One day (6 hours maximum) of training will be provided by Scienscope, training will include;

Basic Radiation Safety

X-Ray system control functions

X-Ray image processing software training

Basic X-ray signature analysis training

Hands-on sample analysis using your typical samples

Training certificates for all attendees

 

1-8. Two Hours On Line Training (First 12 Months)

we will provide two hours of online training during the first 12 months. Online training can be used at the customer’s discretion and divided up into 15 minute, 30 minute and one hour increments. Additional online training can be purchased at a minimal cost.

 

1-9. Warranty

Weprovides a twelve month (12) warranty or 2000 hours (whichever comes first), parts and labor

 


/* Products stats */