DS801 is a single-color LED display is a single-color LED display with a point by point correction, intelligent identification, can be dual-networked, dual-network cable hot backup card, this card has been discontinued, the DS802 can be used to replace the card
I have another RV901T Division, RV908M receiver card hot
Point by point correction, by card (box) correction function
|
DS801 transmitter card support point by point correction to support single point, 2 × 2 points, 4 × 4 points and 8 × 8 four correction mode, calibration 6144 points / module, red, green and blue 256. By card (box) correction for the display screen between the box color correction, red, green and blue 256. |
Intelligent identification card function |
DS801 send card to support intelligent identification program to identify two-color, full color, virtual, lighting and other driving board of a variety of scanning methods and a variety of signal trends, recognition rate of 99%, a set of cards in the hand, Worry-free. |
65536 level (64K) within the gray set any function |
DS801 send card customers according to the situation from the gray scale to 65536 (64K) gray between any adjustment, so that your display to achieve better display. |
Refresh rate arbitrarily set, lock, sync function |
Refresh rate can be set from 10Hz-3000Hz, refresh rate lock-in function to make the display refresh in the computer monitor refresh rate on an integer multiple, to prevent image tear, to ensure image reproduction. The phase-locked synchronization range is 47Hz-76Hz. |
Double oversized belt load area |
Full color 4096 (4K) gray 180Hz refresh rate, with 512 × 128, is the sixth generation of 256 × 128 double, full color static 16384 (16k) gray 300hz, with 160 × 64 is the Six generations of 80 × 64 twice. (Note: need to drive the board can be high clock 30MHz) |
Dual network cable hot backup function |
Receiver card A, B two ports can be used as input or output port can be used for two computers at the same time control a screen, when a computer problems, another computer automatically replace, can also be used for a computer dual cable Control, when a network cable problems, another network cable automatically take over, so that the normal work of the display is guaranteed. |
Multi-screen synchronization and combination of functions |
DS801 send a card to support a send card control with multiple screens, multi-screen working status can be any combination, synchronous display, independent playback, etc., through the shortcut keys, fast switching. |
256 brightness automatic adjustment |
256 brightness automatic adjustment function to make your display brightness adjustment more effective. |
Sound transmission function |
702 card integrated voice transmission, no need to pull the audio cable to the sound can be passed to the display, dual 24-bit 64khz high-fidelity digital and analog and digital conversion, so that your display image better. |
Program online upgrade function |
DS801 send card If the display of the receiving card program to be upgraded, just open the large-screen power through the LED studio to upgrade the program, without the need to replace the receiving card can be upgraded. |
Break the traditional concept of no DIP switch |
No DIP switch design, all settings set by the computer. |
Test function |
Receiver card integrated test function, do not have to send the card to test the display, slash, grayscale, red, green, blue, full bright and other test mode. |
Long transmission distance |
Transmission of 170 meters (measured), to ensure the transmission of 140 meters. |
Supporting software |
LED Studio 10.0 |
This website uses cookies (Learn more) and has a privacy policy (Learn more).