Fluke Networks Cable IQ Qualification Testerเป็นเครื่องมือพื้นฐานสำหรับ ผู้ดูแลระบบเครือข่ายและผู้ติดตั้ง
มีลักษณะโดดเด่นในด้านการวัด Cabling bandwidth และแสดงคุณสมบัติของสายสัญญาณว่าสามารถรองรับ bandwidth 10/100 , VoIP
และ Gigabit Ethernetได้หรือไม่ นอกจากนี้ยังสามารถช่วยลดเวลาการแก้ไขปัญหาทางด้านระบบ Network Cabling ได้ถึง 50%
และเหมาะอย่างยิ่งในงานNetwork Manager และกับงาน Network Support Technicians เนื่องจากต้องมการเคลื่อนย้าย,เพิ่มเติม และเปลี่ยนแปลง
รวมทั้งมีการปรับปรุง ระบบเครือข่ายอยู่ตลอดเวลา
- เป็นเครื่องมือที่สามารถ บอกประสิทธิภาพของสายได้
- เป็นเครื่องมือที่ช่วยแก้ปัญหาทางด้านสาย ได้เป็นอย่างดี
- สามารถหาความยาว ตำแน่ง ขาด, short, open, split ของสายได้
- มี function ตรวจหา Crosstalk และ Impedance ของสาย
- มี wire map ของการเข้าหัวของสาย
- ออก report ได้
- เป็นเครื่องมือที่สามารถ Qualifies Bandwidth ของสายได้
- Support RJ45,RJ11,Coax
- สามารถตรวจสอบสายได้ว่า รองรับ 10/100 ,Gigabit Ethernet และ VoIP หรือไม่ ?
- มี function Blink Port ที่ Flash ไฟไปที่ Switch หรือ Hub เพื่อตรวจสอบการทำงานของ device และค้นหาPort ปลายทางได้
- มี function ตรวจสอบคุณภาพของสาย โดยออกมาในรูปของเสียงได้
- สามารถ Discover ไปถึง Device และบอก Speed ของ Device ได้
- สามารถส่ง Tone ใช้กับ Intellitone Pro 200 Probe เพื่อใช้ในการค้นหาปลายสาย
- เก็บข้อมูลได้ 250 ผล - รองรับ 10/100 ,Gigabit Ethernet, VoIP, CCTV และTelco
Cable types supported |
UTP, STP, FTP, SSTP, RG6, RG59, audio and security |
Qualification autotests |
1000BASE-T, 100BASE-TX, 10BASE-T, VoIP, 1394b S100, TELCO, Wiremap only, Coax |
Supported tests |
Wiremap, length, cable signal performance, digital toner, analog toner, Ethernet port detection and identification, analog telephone detection, blink port light, continuity, speaker test, cable fault finding, video signal detection. |
Wiremap |
Can detect single wire faults and supports MultiMap mode with up to seven remote office identifiers. Draws proportional wire length to breaks. Detects split pairs. |
Find fault |
Measures crosstalk and impedance and compares against appropriate limits based on qualification test selected. Detects location of large point sources as well as distributed sources in the cabling if they are sufficient to disqualify the application |
Results storage |
Up to 250 qualification test results |
Power |
Battery type: 4 AA (NEDA 15A, IEC LR6) alkaline batteries |
Battery life |
20 hours of typical use, without backlight |
Other battery types supported |
4AA photo lithium, NIHM, NICAD |
Dimensions and weight |
7in x 3.5in x 1.75in (17.8cm x 8.9cm x 4.5cm) 1.2 lb (0.55 kg) |
Models & Accessories
Model Number/Name | Description |
CIQ-VOIP
|
VoIP Enterprise Service Kit – Includes the CableIQ Advanced IT Kit (CIQ-KIT) and Nettool Series II inline tester with VoIP testing(NTS2-VOIP). |
CIQ-SVC
|
CableIQ Service Kit includes CableIQ Qualification Tester, six CableIQ Remote Identifiers, CableIQ Reporter software CD, RJ45-RJ45 shielded patch cords (2), USB cable, coax “F” push-on cable, RJ45/RJ11 universal coupler, LinkRunner Network Multimeter, LinkRunner main wiremap adapter, Intellitone Digital Probe 200, test accessory soft pouch, owners CD and quick start guide, packaged in a rugged carrying case; one (1) 9V and six (6) AA batteries included. |
CIQ-KIT
|
CableIQ Advanced IT Kit Includes CableIQ main unit with remote adapter, CableIQ Reporter software CD, IntelliTone 200 Digital Probe, Remote IDs #2-7, (2) RJ45-RJ45 patch cord, USB cable, coax 'F' push-on adapter, 75-ohm coax patch cord, RJ45/11 universal coupler, RJ11-RJ11 patch cord, owners CD and quick start guide, (4) AA batteries, test accessory soft pouch, hard carry case. |
CIQ-FTKSFP
|
Copper and Fiber Technician’s Kit – Includes the CableIQ (CIQ-KIT) and SimpliFiber Pro (FTK1000) Fiber Test Kit. |
CIQ-100
|
CableIQ Qualification Tester Includes CableIQ with remote adapter, CableIQ Reporter software CD, (2) RJ45-RJ45 patch cord, USB cable, coax 'F' push-on adapter, owners CD and quick start guide, (4) AA batteries, soft carry case |
CIQ-GSV2
|
CableIQ Gigabit Service Kit Includes: CableIQ Qualification Tester, LinkRunner AT 1000, IntelliTone Pro 200 Probe, CableIQ Remote Identifiers #1-7 and deluxe carrying case. |
LRAT2-CIQ-GSV
|
LinkRunner AT 2000/CableIQ Gigabit Service Kit Includes: LinkRunner AT 2000, CableIQ Qualification Tester, IntelliTone Pro 200 Probe, CableIQ Remote Identifiers #1-7 and deluxe carrying case. |
Model Number/Name | Description |
CIQ-CIT | CableIQ IT Hard Carrying Case |
CIQ-COAX | CableIQ Coax Adapter Kit includes F-connector, BNC and RCA connectors |
CIQ-IDK24 | CableIQ Remote Identifier Kit includes remote identifier numbers 2-4 |
CIQ-IDK57 | CableIQ Remote Identifier Kit includes remote identifier numbers 5-7 |
CIQ-RJA | RJ45/11 Modular Adapter |
CIQ-SPKR | CableIQ Speaker Wire Adapter |
CIQ-WM | CableIQ Main Wiremap Adapter (replacement part for lost or damaged unit) |
CLIP-SET | Clip Set includes RJ45 to 8-clip test lead |
MT-8200-53A | IntelliTone 100 Probe Includes: IntelliTone 100 Probe, lanyard, owners CD and quick start guide, and 9 volt battery |
MT-8200-63A | IntelliTone 200 Probe Includes: IntelliTone 200 Probe, RJ11 and RJ 45 patch cables, lanyard, owners CD and quick start guide, and 9 volt battery |
สินค้า By order 15-20 วัน
This website uses cookies (Learn more) and has a privacy policy (Learn more).